ABSTRACT
Oil industry is a prominent aspect of
modern economy and as it were exploration activities are very important for
continuity of oil production.
The exploration activities involve the
acquisition of data and processing. As
exploration activities increases in the modern world, the computer manufactures
are also working hard to produce. Supper computer and their processing that are
involved.
Many firms are emerging fast and of
course modern firms make the use of computers, especially the mainframe
computer which has large memory space.
As the activities is in the increase, there is need to increase storage
facilities because there comes a time when the main memory of computer will be
unable to hold all information required.
This is where the secondary storage device called the magnetic tape
comes to play.
A general description of the system
goals, facilities and application are involved.
TABLE OF CONTENT
CHAPTER ONE
BACKGROUND OF THE STUDY
1.1 Introduction
1.2 Statement of the problem
1.3
Purpose of the study
1.4
Objective of the study
1.5 Scope of the problem or project
1.6 Limitations of the study
1.7 Assumption
1.8 Definition
CHAPTER TWO
LITERATURE REVIEW
CHAPTER THREE
DESCRIPTION AND ANALYSIS OF THE
EXISTING SYSTEM
3.1 General Description of the
existing system
3.2 Method of data collection used
3.3 Objective of the Existing System
3.4 Organizational Structure
3.5 Input Analysis
3.6 Process Analysis
3.7 Output Analysis
3.8 Information flow Diagram
3.9 Problem of the Existing system
3.10 Justification for the new system
CHAPTER FOUR
DESIGN OF THE NEW SYSTEM
4.1 Input specification and design
4.2 Output specification and design
4.3 File design
4.4 Procedure chart
4.5 System flowchart
4.6 System Requirement
CHAPTER FIVE
IMPLEMENTATION
5.1 Program Design
5.2 Program flowchart
5.3 Pseudocodes
5.4 Source program listing
5.5 Text run.
CHAPTER SIX
6.1 System documentation
6.2 Program documentation
6.3 Users documentation
CHAPTER SEVEN
CONCLUSION AND RECOMMENDATION
7.1 Conclusion
7.2 Recommendation
BIBLIOGRAPHY
CHAPTER ONE
1.1 INTRODUCTION
The exploration activities involve the
acquisition of data and processing. As
the exploration activities increases in the modern world, the computer
manufactures are also working hard to produce super computers and their
processing algo: This with high computing power to cope with the lager data
processing that are involved.
Owing to the inevitable roles that are
played by the oil industries in the modern world, the federal govt. recently issues out a white paper enforcing
all oil companies to do more exploration to increase oil reserver. This means that there will be more data
acquisition and processing jobs in the near future
The importance of oil exploration in
modern countries can never be over emphasized.
In the United State of America and Britain, intensive exploration
activities are on for the last two decodes all in attempt to have enough oil
reserves.
And so seismic data processing is very
indispensable in the oil industry because it is the first step taken in the
discoming of hydrocarbon or better more seismic data processing is a key
sequence in search for hydrocation.
In the processing of seismic data,
care should be taken because of not properly processed, it might lead to wrong
interpretation and this might lead to false prospect. Infact wrong processing will reduce the
success ration in the discovery of hydrocarbon and this causes the cost of
drilling to increase. In essence, wrong
processing will lead to drilling false prospect and he know that it costs
millions if not billions of Naira to dill a well.
The role of govt. in oil industry had
gradually progressed from a regulatory one to direct involvement in all
exploitation and exploration initially government only made rudimentary laws
and collected royalties for the oil companies.
By 1971 the situation charged as oil become more important to the
Nigeria Economy. Oil accounts for about
90% of the total foreign exchange
earning for the country.
In essence, Nigeria that wants
increase in her revenue, must engage in acquisition, processing and management
of seismic data. Seismic data management
systemic therefore a software development for the purpose. That is why the case study was the integrated
data services limited (IDSL) Benin city a subsidiary of the Nigeria National
Petroleum Co-operation (NNPC)
1.2 PROBLEMS OF THE STUDY
In the search for hydrocarbon, the
initial question had always been where exactly under the surface are the
anticlines or the structures within which the hydrocarbon can be accumulated.
This question is answered in part by
seismic data acquisition and the main by seismic data processing transforms and
refines these data to level where the above question is answered.
The problem is how can these
information collected from the field be presented and protected from
destruction. That is why the tape
librarians were introduced to help in managing these tapes, but as time goes on
they cannot manage them effectively.
This has created many problem for the management
The solution to the problem will lie
in removing any factors that inhibit the ability of the librarian to make the
storage and the retrieval of tapes easy in the organization.
1.3 PURPOSE OF THE STUDY
This research will be very useful to
both student individuals, co-operate bodies and general public as a whole who
are either engaged or way wish to engage in seismic data acquisition and
processing in the future
The purpose are as follows
1 Ensuring the acquisition of
good quality seismic data in an effective manner.
2 Ensuring that all field
tapes collected from the field are sent to the processing centre and then its
seismic data in tapes are presented in a form that is convenient for geological
interpretation.
3 To ensure that processing
sequence are followed and a good result suitable for acceptance.
1.4 OBJECTIVE OF THE STUDY
For fast data processing you ensure
reliable of data to discover more hydrocarbon.
To increase revenue by engaging in acquisition processing and
management.
1.5 SCOPE OF THE STUDY
In this research work the study was limited
to the use of Electronic Data Processing (EDP) on the information management
control in seismic Data processing.
1.7 ASSUMPTION
It is assumed that if this program
is properly implemented. It will go
along way to eradicate the challenges and constrain encounter in the existing
system.
Format: MS Word
Chapters: 1 - 5
Delivery: Email
Delivery: Email
Number of Pages: 65
Price: 3000 NGN
In Stock
No comments:
Post a Comment
Add Comment